AFK Electric Center Stand 00-16

Description

As of 6/7/23.   Allow 2-3 week to ship.  Thank you for your understanding.

AFK Electric Center Stand will fit 2000-2016 Touring Models.  It was designed and will work for cross under exhaust.  Also see first electric center stand with legs motion forwards. AFK Center Stand is compatible with all air ride units.   Sold in Gloss Black finish.

Note:When air ride is fully extended drive belt can possibly contact stand and should never be ridden fully extended. Reccomend adjusting belt at ride height.

Drive belt should be tightened to manufacture specs at desired “ride height ” failure to do so can also result in belt contacting top of center stand.

Our AFK Touring Electric Stands comes with two set of leg kits. 90% of our customers utilize Kit #2. All non-rake bikes are Kit#2.

Kit#1- L1 set & L2 set                                         Kit #2- L2 set & L3 set

L3 Height is approximately 3-1/2″/ L3 Leg range with standard pack is approximately 3-1/2″-5″ (measurement  from bolt hole)

L2 Height is approximatley 2-1/2″/ L2 Leg range with standard pack is approximately 2-1/2″-4″

L1 Height is approximatley 1-1/2″/ L1 Leg range with standard pack is approximately 1-1/2″-3″ 

(AFK Touring Electric Center Stand (Standard Pack) comes with three sets of stackable/inserts (shims) and one set of end caps.)

Additional stackable/inserts (shims) may be added.

Here is a list of confirmed stock exhaust that is compatibile with AFK Touring Center Stand: Stock D&D w/ghost pipe, Stock Reinhart, Stock Bassani w/ghost pipe, TAB Performance, & VAN HINES POWER DUALS

WILL NOT WORK WITH CHROME WORKS EXHAUST.

ALTERING  MOTOR, MOTOR WIRE, OR HARNESS VOIDS WARRANTY.